XtGem Forum catalog
HomeBlogAbout Me

How To Detect Samsung Phone



  1. Detect Phone Usb
  2. How To Detect Samsung Phone On Pc
  • Products
    For Windows
    Android Manager for Win
    Android Data Recovery
    Phone Transfer for Win
    Android Root Pro
    For Mac
    Android Manager for Mac
    Android Data Recovery Mac
    Phone Transfer for Mac
    More >>>

#Odin #SamsungOdin SAMSUNG USB DRIVER: Link2: AND GIFTS: http://bit.ly/donatetop. The most reliable way of knowing the authenticity of any Samsung Galaxy device is by using Samsung Kies. Samsung Kies will scan your device and display important information about it. To use Samsung Kies to identify your phone, follow these steps: 1. Samsung has long offered a Find My Mobile service to help Galaxy phones owners track down their lost phones. The service is separate from Google's Find My Device offering, and is something you can.

Home > Resources > My PC & Mac Doesn't Recognize my Android Phone (Samsung Galaxy S6/5/4))

Just enter Start.

(0 comments)

One of the most common procedures among Android users is to connect PC and Android smartphone/ tablet via USB port in order to perform different tasks, such as file transfer, data backup, phone switch or data recovery. However, this task should be completely straightforward but it does not always work. Sometimes we get to meet with the reality that our PC does not recognize the Android device connected to it as a USB storage device. Undoubtedly, this It becomes a very frustrating problem.

Usually, when such a problem arises or when we see our Android device connects and disconnects constantly to our PC, we need to confirm the cable is in good state. I have checked many forum users who write consulting solutions to this problem, so I have decided to publish a list of suggestions to let the PC recognize your smartphone. The following 3 tips works for various Android devices such as Samsung Galaxy S4/5/6/7, HTC, LG, Motorola, Sony, running Adroid 6.0 M, Android 5.1/5.0 Lollipop, Android 4.4 KitKat, etc.

NOTE: If you're looking for data recovery solutions for Android devices, such as Samsung Galaxy S, and HTC One, read this tutorial: how to retreive lost data from Android phone.

Tips 1 Changing USB Cable

As mentioned above, the fact is that one of the first steps we must take to this inconvenience is to check whether the USB cable is in good condition or not. It is best to change the USB cable to another to sort the problem out. It is quite easy to find a USB cable in nowardays.

Tips 2 Enable USB Debugging Mode

First, make sure you have the option 'USB debugging' enabled. You can see the state under About phone -> Developer options. If you do not have this option turned on, you have to go to 'Settings'> 'About phone ' and press several times on 'Build Number'.

For different Android system, try to follow the 3 ways to enable USB debugging.

  • For Android 2.3 or earlier: Enter 'Settings' < Click 'Applications' < Click 'Development' < Check 'USB debugging'
  • For Android 3.0 to 4.1: Enter 'Settings' < Click 'Developer options' < Check 'USB debugging'.
  • For Android 4.2 or newer: Enter 'Settings' < Click 'About Phone' < Tap 'Build number' for several times until getting a note 'You are under developer mode' < Back to 'Settings' < Click 'Developer options' < Check 'USB debugging'
Recognizing

In many cases, you need to enable USB debugging on Android phone, including retrieve Data from Samsung S6, or export Android messages to PC, So you should know how to skillfully enable USB debugging on your Android device, you will be made use of these later on. How to split a video in half on iphone. Mobikin doctor for ios 1 0 11.

Tips 3 Check Android USB Driver on PC

Android USB driver must be installed on the computer in order to let the Android device being recognized by computer. if it was not installed or corrupted, then the computer doesn't recognize Android phone for sure. So you have to check if there was problem with Android USB driver.

How to Check Android USB Driver on PC:
  • On your computer go to 'My Computer'.
  • Click with the mouse right click and hit properties.
  • On the menu that appears, click 'Hardware'.
  • Click on 'Device Manager'.
  • When you tap out a list: Universal Serial Bus controllers . If there is no yellow mark, it means USB driver is installed correctly on the computer. Please skip to the other tips. If yes, then you have to download and install Android USB driver.

Tips 4 Reinstall Android Device Drivers

There are many Android phone being released in a year as well as the software. If the USB driver was out of dated, then it may also cause the phone not being recognized by the computer. How much is minecraft. So in this case, you have to reinstall the old driver and install the latest one from official site.

  • Go to 'My Computer' and hit 'Property'.
  • Hence the device does not recognize, click on it and select properties appear.
  • In the overview, you indicate that you have to install the device driver. If so, click where it says 'change settings' and a sign that says you reinstall the driver or something similar appears.
  • There you click and you'll ask if you want to find the driver automatically or within the PC software. Click on the second option.
  • I now ask you to choose the type of device you want, you must choose the one that says, wire transfer, or maybe USB. Click there, and to read the USB device will be installed.

I hope that some of these solutions will help you solve the problem. So you can backup phone data to pc, root the phone or recover deleted files from it. If you know any alternative solution, do not hesitate to share with us.

Update on 2017: With the latest update of Android OS, the phone is connected as storage device in default. So if you want to recover deleted files from Android, then you should make the phone connected as MTP. You can change it on the phone once it is detected by the computer. This is brought by TunesBro software.

Related Articles

  • Samsung to PC | Android SMS Recovery | Samsung Contacts Restore | iPhone to Samsung | iPhone to Android | HEIC to JPG | Android SD recovery | Samsung Photo Recovery | ISO to USB | Win 10 Reset | Android SMS to PC | More >>
Copyright © 2015 AndroidPhonesoft. All Rights Reserved. Android is a trademark of Google, Inc

Is your device not being recognized by Odin Flash Tool? Have you reinstalled Odin and yet your device is not being recognised by Odin? This article will show you how to fix device detection errors with Odin.

You will be aware that Odin is used to flash a Samsung device with either a stock or custom ROM. However, one of the negative aspects of using Odin is that it will occasionally fail to detect your device. Luckily for you, this article will show you how to fix Odin not detecting phone and suggest a better method for you to flash your device (Fixppo for Android).

7 Tips to Fix Odin Not Detecting Phone

Before you proceed with any of the fixes listed further down, make sure you have completed these basic checks below as it is easy to forget to complete some of the basic requirements to use Odin.

Tip 1. Enter Download Mode

If your device is not in Download mode, you can do this by powering off your device, hold the volume down, power and home keys and then release. Press the volume up key when shown a boot menu. How much does it cost to get microsoft office. A similar method is used for devices without a home button, with using the Bixby button instead of the home button and pressing thepower button, not holding it.

Tip 2. Check USB Cable

USB connection will also lead to Odin not detecting phone problem. Make sure your USB cable is not damaged and if possible, use the original cable that comes with your device. Some old USB cable may not work properly and the connection could be interrupted.

Tip 3. Check USB Port

It is possible that your USB port may be damaged so try another port when connecting your device. Odin is extremely sensitive to data qualities so a lack of transfer quality may mean that Odin fails to recognize your device. It is recommend that you use the USB port on your computer instead of a USB slot.

Tip 4. Check USB Debugging

Detect Phone Usb

Make sure that USB debugging and OEM unlock is enabled on your device through the developer's options. Otherwise it cannot be recognized by Odin. The method to enable developer's options varies for different devices however you will need to tap on the 'build number' option in settings multiple times to enable it. It might be different on different models.

Tip 5. Install Samsung USB Drivers

If you have attempted all the instructions given above and your device is still not being detected by Odin, it means that your device drivers are not installed. You will need to install Samsung USB drivers for mobile phones. These can be found on the Samsung developers' website and can be downloaded. Search online for 'Samsung USB Drivers'.
To install these drivers, you will need to complete the following steps:

  • Download Samsung USB Drivers from their website and extract them onto your PC by right-clicking them and choosing 'extract all'.
  • Open the extracted folder and double click on the file inside the folder to run it.
  • If your device is connected to your PC, make sure you disconnect your device.
  • Follow the setup wizard (choose your country and then install the drivers).
  • Once the setup has completed, close the setup wizard and then connect your device.

Your device should now be recognized by Odin and you can continue flashing your device with the firmware of your choice.

How To Detect Samsung Phone On Pc

Tip 6. Use Device Manager (Windows)

An alternative method to fix Odin not detecting phone is to update your phone's drivers through device manager on your PC.

  • Connect your Android device to your PC that you would like to flash using Odin.
  • Open device manager on your PC by searching for it on windows or through Control Panel.
  • Find your device in the list of devices and collapse the menu.
  • Right-click on your device, choose 'Update Driver Software' and click on 'Browse my computer for driver software'.
  • Choose the option that says, 'Let me pick from a list of device drivers on my computer'.
  • Pick 'Samsung Mobile USB CDC Composite Device'.
  • Install the driver and then disconnect your device.
  • Connect your device again and use Odin.

As you can see, Odin is difficult to work with because it requires key drivers to be installed. https://freelan.mystrikingly.com/blog/when-i-play-minecraft. Many issues can arise when using Odin, which puts your Android device at risk of being bricked or the flashing process of failing.

Tip 7. Use iMyFone Fixppo for Android

An alternative solution to using Odin to repair and flash your device is to use the Fixppo for Android Repair Tool by iMyFone. You don't need to worry about Odin not detecting phone anymore. The Fixppo Repair Tool makes it easier to flash your device and repair other issues because it requires you to do less and you do not need any expert knowledge in Android in order to repair your device. Macbook air thunderbolt external hard drive. It will automaticallydownload the firmware you need for you and is quicker than using software such as Odin.

Fixppo contains a huge number of fixes for your device, some of which are listed:

Detect
  • Android device stuck in a boot loop
  • Device is not powering on/off
  • Device is stuck on black or white screen
  • Device is stuck on the boot screen or in download mode (Samsung devices)
  • Device gets bricked or dead.

These are only some of the issues that Fixppo for Android can repair by flashing your device. Fixppo for Android is extremely easy to use, and you can have your device repaired in a few simple steps. You will need to download the Fixppo tool . After you have downloaded the tool, follow these steps.

  • Select your Android device's details and click on the 'Download firmware' button. The firmware will automatically be downloaded and extracted without you having to do anything else.
  • Press 'Start', connect your device and put your device in Download mode by following the simple on-screen instructions.
  • Wait for the repair to finish on your device, close the Fixppo software and disconnect your Android device from your PC.

That's it! Your device has been flashed quickly and without you having to do much.

Conclusion

If Odin has failed to recognize your device, it is probably because there is some problem with the physical connection or you are missing the required drivers in order to connect your device to your PC and flash it by using Odin. This is an issue that can arise with other flashing tools however, it is safer, quicker and easier for you to use the Fixppo Repair Tool for Android as you are not at risk of downloading malicious or incompatible firmware for your device. Fixppo completes most of the steps automatically so it is better to use Fixppo than Odin.





How To Detect Samsung Phone
Back to posts
This post has no comments - be the first one!

UNDER MAINTENANCE